Connection method of network cable socket maintena

Network cable sockets are generally used in indoor walls as network cable jacks, and the connection method of network cable sockets is basically the same, which is more convenient and simple than crystal heads. Moreover, the network cable has corresponding colors. Don't be afraid of being connected incorrectly, but the wiring tool used is not network cable pliers

network cable sockets are generally used in indoor walls as network cable jacks. The connection method of network cable sockets is basically the same, which is more convenient and simple than crystal heads. Moreover, the network cable has corresponding colors. Don't be afraid of being connected incorrectly, but the wiring tool used is not network cable pliers. The following editor will introduce the connection method of network cable socket and the maintenance of network cable socket

network cable socket connection method

step 1: use the wire stripping tool to peel off the outer sheath of the twisted pair at the place about 8 cm long of the offline head, and four pairs of twisted pairs will be exposed

step 2: remove the line, press the corresponding line into the marking post, and select the preferred line sequence mode according to the color code indicated on the information module

step 3: after pressing all the wires into the slot, press the module and the wires with tools, clamp the wires in the module, and then cut off the excess thread ends

step 4: install the wired information module on the 86 box panel, so that the wall network cable socket is installed

maintenance of the network cable socket

1. The network cable socket should not be switched on and off repeatedly, otherwise the power consumption will be increased, because the multi control switch will produce a large starting current when it is turned off, and it will also affect the service life of the network cable socket, causing wear and tear of the operating mechanism of the network cable socket

2. Electricians must be allowed to operate the network cable socket when wiring, because the wiring process is not professional, which may bring trouble to future life

3. The network cable socket should be cleaned with alcohol, not wiped with water, which will leave traces and is unsafe

editor's summary: This is the introduction about the connection method of network cable socket and the maintenance of network cable socket. I hope it will be helpful to you. You can pay attention to information if you want to know more about it

威海男科医院

宁波妇科医院

成都外阴白斑医院

成都甲状腺医院